Soleus Air FTY-25 10-Inch Wall Mountable Table Fan Review
Soleus Air FTY-25 10-Inch Wall Mountable Table Fan Feature
- 10-inch silver-and-blue three-speed oscillating table fan with wall-mount option
- Fan head pivots 180 degrees; three speeds and oscillator toggle switch
- Sturdy, silver-tone plastic with blue accents; modern, asymmetrical design
- 2-hour timer for automatic turn-off; wall-mounting brackets; 5-foot power cord
- 115 volts; measures 14-1/2 by 14-1/2 by 6-1/2 inches; one-year warranty
The FTY-25 table fan has a modern look to it, with an asymmetrical, crescent-shaped stand that curves around the circular fan head. It's built of heavy-duty silver plastic and has blue-gray detailing. It sits on two rounded feet; there are wall-mounting screw brackets on the underside of the feet. Speed selection is made with a sliding knob on the side, and there's a simple on-off toggle for the oscillation. The timer button echoes the crescent shape of the fan's body; it is marked in 20-minute increments, but it can be set at any point between 0 and 120 minutes. The power cord is 5 feet long, which can be especially helpful when using the FTY-25 as a wall fan.
To use as a wall fan, mount two screws vertically to a wall at a distance of 7-5/6 inches from each other, and use the two wall-mounting screw brackets in the bottom of the feet. Always unplug fan before cleaning; use a soft cloth, dry or only slightly moistened, and towel or allow to air dry afterward. Do not allow water to drip on or enter fan housing. The 115-volt Soleus Air FTY-25 table fan measures 14-1/2 by 14-1/2 by 6-1/2 inches, with a 10-inch fan head. Soleus Air offers a 1-year limited warranty against defects in material and workmanship under normal use conditions. --Garland Withers 10" table fan with three wind speeds, a two hour timer. It can be mounted on the wall or placed on a table. Oscillating front grill.
No comments:
Post a Comment